 |
|
|
950 Front Mounting Options
|
|
 |
H-Front was designed with a longer flange to accommodate a 1 1/4" self close drawer track. Optional locating tab fits against the face frame for easy locating of the slide. |
 |
S-Front configuration is our standard and uses a drawer track with a standard 9/16" self close. |
 |
C-Front configuration can be used as a standard mounted face frame slide or a dowel can be added for a plug-in system. |
 |
RV-Front configuration designed for the recreational vehicle industry. Stop tab will prevent the drawer from becoming ajar while traveling. Drawer box must be lifted slightly to be opened. |
 |
M-Front configuration to be used with a panel mount cabinet. Multiple holes along slide are easily mounted to your panel type cabinet. |
|
950 Rear Mounting Options
|
|
 |
240 seated bracket can rest on nailer strip or wood blocking (Uses S-Rear). |
 |
241 Hanging bracket can rest on nailer strip or blocking. (Uses S-Rear). |
 |
250 Screw-In bracket is our standard plastic mounting plastic bracket. Does not provide lateral movement as with the 251 bracket. (Uses S-Rear). |
 |
251 Screw-In bracket is our standard plastic mounting plastic bracket. A two piece bracket which allows longitudinal and lateral movement and adjustability.(Uses S-Rear). |
 |
260 Plug-in bracket for face frame cabinet construction. Plastic dowels easily plug-in to pre-bored holes for quick installation. This system assures accurate and constant slide placement. (Uses P-Bend rear & has 11mm long dowels). |
 |
260E (Extended) Plug-in bracket for face frame cabinet construction. (Uses P-Bend rear and has 17mm long dowels). |
 |
261 Screw-In bracket is our standard plastic mounting plastic bracket for use with a p-bend. (Uses P-Bend rear). |
 |
P-Bend rear has horizontal slot for attachment directly to back of cabinet, accepts 260, 260E and 261 plastic brackets. |
 |
V-Notch rear has horizontal slots for attachment directly to back of cabinet. |
 |
S-Rear is our standard rear configuration. Accepts plastic brackets 240, 241, 250 and 251. |